If you receive this e-mail as text only or if it is incomplete or unreadable, then please click here.

www.omnistar.nl
 
  • Announcements
  • New Products
  • Applications
  • Latest firmware upgrades
  • Get to know Cor Landsman
  • Fairs update

  •  
     


      Announcements
     
    New NovAtel DSP

     

    NovAtel has launched new digital Signal Processor firmware for the NovAtel Propak based receivers. DSP1.101 had difficulty tracking the OmniSTAR correction signal in dynamic conditions. This has been solved by DSP1.102.

    Customers now using DSP1.004 do not need to upgrade.
    Download DSP1102.exe



     
     
    Convergence

    For HP and XP is the convergence time an important issue. It depends on the number of available satellites. Receivers do switch to "Converged" mode when the SQRT (StdevLat^2+StdevLon^+SdevHeight^2) is less than 30 cm.
    During convergence the reported accuracy of latitude and height is at the same level while normally the accuracy of the Longitude is twice the value of the Latitude. The fastest way to converge is using a known point, because then the solution is converged directly.
    The second best method is to stay static because the convergence time is then 10 minutes average (max. 20 minutes). If the receiver is on the move (dynamic) the average convergence time is 30 minutes (max. 50 minutes).


    Internet broadcast at Spitsbergen

    OmniSTAR has been asked to deliver corrections to Spitsbergen (future airport of the Norwegian Svalbard Island in the Artic Ocean).
    As Spitsbergen is far North, the geostationary satellites have zero degrees elevation. The solution has been to broadcast the corrections from the Network Control Centre in Perth by Internet.
    Using a GPRS Siemens mobile phone the data is sent to the OmniSTAR 8300HP receiver.
     
    Click to enlarge




    Click to enlarge



      New Products
     
    OmniSTAR 8200HP: the newest XP/HP+ capable receiver

     

    We are glad to introduce our latest dual-frequency, OmniSTAR XP and HP+ capable receiver, the OmniSTAR 8200.
    This easy-to-operate 10 Hz receiver with an LCD display is very suitable for a wide range of applications, from agriculture to surveying, from construction to aviation. Combined with the dedicated Z+ antenna and an OmniSTAR XP/HP+ subscription it delivers worldwide decimetre real-time accuracy.

    Please contact us for additional information or a demonstration.

     
    Click to enlarge


       
     

    New compatible products

    NovAtel has recently released the OEMV-1 and OEMV-3 boards. Both boards are intended for integration into complete products.
    The OEMV-1 is an L1 GPS receiver with OmniSTAR VBS capability and integrated L-band tracking. The OEMV-3 is a full GPS/Glonass receiver board including OmniSTAR VBS and HP/XP. Also NovAtel has released a Propak-V3, which is OmniSTAR VBS/HP/XP capable in a housing.


     
       
     

    For the construction market Trimble has released the SPS-550, SPS-750 and SPS-850. These receivers are OmniSTAR HP/XP capable.
    They all have an internal battery and radio included and they are Glonass capable.

     


      Applications
     
    Photogrammetry

     

    The aerial survey industry is looking more and more for quick and accurate information to be provided to the GIS industry.

    Large- and mid-format digital cameras and Synthetic Aperture Radar (SAR) are sensors to be operated for this task, allowing immediate processing after landing of the survey aircraft. The missing information are the exterior orientation parameters (x/y/z phi/omega/kappa) for each image taken or the related SAR flights.

    By using OmniSTAR-HP together with IGI's AEROcontrol GPS/IMU system these EO-parameters become available before landing of the survey aircraft with the necessary accuracy! For that reason the customer does not have to wait for post-processing huge amounts of data before any results can be presented. The customer now has instant results.

    IGI GmbH, a world leader in the development and manufacture of guidance, management and precise positioning/ attitude determination systems performed related tests with excellent results, is now offering CCNS/AEROcontrol/OmniSTAR-HP for integrated sensor orientation (ISO) and direct geo-referencing (DG) for any airborne sensor.

     
    Click to enlarge





      Latest firmware upgrades for the OmniSTAR capable receivers
     
    Click on the logos to go to the website
     
    Manufacturers Models VBS2 compatible Latest firmware Release date VBS/HP
    Hemisphere

    link I
    link II
    Cornerpost 4.8 4.8 Dec. 2005 VBS
    DGPSMAX /SLX 4.8 4.8 Dec. 2005 VBS
    Outback 4.0 4.8 Dec. 2005 VBS
    Propak LB Plus 2.302 2.312 Nov. 2005 VBS/HP
    3000 and 3100LR 4.01.01 4.01.01 Sept. 2004 VBS
    3200 3.00 3.00 Sept. 2005 VBS
    3500LR 02.06.05 02.06.05 Oct. 2005 VBS
    3510LR 02.06.05 02.06.05 Oct. 2005 VBS
    7114LR12 3.00 3.00 Sept. 2005 VBS
    8200HP 2.312 2.312 Aug. 2006 VBS/HP
    8300HP 2.302 2.312 Nov. 2005 VBS/HP
    8400HP 1.03 1.03 July 2006 VBS/HP
    Invicta 310 4.33 4.33 Feb. 2005 VBS
    RPR410 2.312 2.312 Nov. 2005 VBS
    GSR 2650 LB 2.312 2.312 Nov. 2005 VBS/HP
    Axis3 4.8 4.8 Dec. 2005 VBS
    MKIV 1.0 1.37 Jan. 2005 VBS/ Nearest Station
    MAP-RT - - June 2005 VBS/HP
    MAP-HP 1.0p2b2 1.0p2b2 June 2005 VBS/HP
    AgGPS 110, 114 and 132 3.00 3.00 Oct. 2005 VBS
    AgGPS 252 and 332 3.10 3.10 Jan. 2006 VBS/HP
    SPS-550, SPS-750 and SPS-850 3.10 3.10 March 2006 VBS/HP
    Pathfinder power 1.70 1.70 March 2005 VBS
    PRO-XRS 1.70 1.70 Jan. 2003 VBS

      Get to know Cor Landsman better

     

    How long have you been working for OmniSTAR BV?

    [CL] I have been working for OmniSTAR for almost 6 years now. As Logistics Manager my role is to take care that orders received for our products and services are delivered on time to our customers. Whether it concerns the purchase of hardware (bundles, antennas or accessories) or the purchase of a signal subscription it does not matter, I have to make sure they both go out of our office in good "shape" and when needed by the customers. My working day can get sometimes pretty hectic especially during the Spring season.



    What do you like best about your job?

    [CL] What I really enjoy is actually the daily phone contact with customers from various countries. One second I can be talking to a German customer that needs an activation and the next one I can be talking to someone in Siberia.

    I also enjoy working together with my colleagues. I like the working atmosphere within OmniSTAR, which is a good thing for me as I work a lot with my colleagues. Alone you can't do it… working together is nicer. I work closely with the Sales and the Workshop departments. Communication between these groups is key. I am the link between them.

    Anything else you would like to share with our readers?

    [CL] I will reveal you a little secret, I often stand model for the OmniSTAR advertisings and I quite enjoy it. It is fun. (see the picture)

     
    Click to see the other side




      Fairs
     
      In the last months…

     
    Ag-Chem anniversary:
    Last June Ag-Chem Europe celebrated its 15th anniversary, which was combined with the opening of a new production assembly hall during a 4-day field event at Grubbenvorst.
    OmniSTAR was invited to participate in this event. We had a stand on the premises in order to support Ag-Chem Europe and the invited dealers coming from all over Europe to give additional information about the positioning services we offer.
    OmniSTAR's Managing Director Mr. Erik Hammega presented a gift to Mr. Adrie Kunst (Director of Ag-Chem Europe) standing for the thriving cooperation OmniSTAR have had and still have with Ag-Chem Europe. Again we congratulate Ag-Chem Europe with the achieved results and good prospects for the future.
     
    Click to enlarge

     
      Elrob:
     
    OmniSTAR B.V. was also present in June at the 1st edition of the European land-robot trial (Elrob)organised by the German Federal Armed Forces.
    Many innovative robot designs were presented varying from remote controlled urban reconnaissance robots, UXO detection and UXO removal robots to satellite controlled unmanned robotic vehicles and fully autonomous vehicles. Also remotely controlled airborne reconnaissance vehicles were on live display.
    OmniSTAR capable receivers with VBS and HP correction signals were used on equipment participating in the event in order to enable the unmanned vehicle to accurately determine its position in real-time during missions.
     
    Click to enlarge

     
     
    Cereals 2006:
     
    OmniSTAR again took the opportunity to exhibit at Europe’s largest field event for the Arable sector “Cereals 2006” held in Lincolnshire UK.

    This two day show provides an excellent opportunity to meet OmniSTARs partners in the machine guidance and precision farming market, view equipment operating real-time in the field, stay abreast of competitive developments and most importantly, extend a little Dutch hospitality to our friends and clients.

    We thank all those who took the time to stop by the stand. We look forward to seeing you at next year’s event in Cambridgeshire again.
     
     
     
    DLG
     

    The month June was a busy month for us as we also took part in the DLG Field days(DLG Feldtage) which took place in Germany. During the event several tractors using OmniSTAR-HP, for automatic steering and guidance, were on display and could be driven for test.
    These type of outdoor field day events are an excellent opportunity for people to testdrive different brands of GPS controlled tractors before actually buying them. For us it was a good opportunity to have important face-to face contact with our dealers in the Agricultural market and get feedback from end-users as well.

     
    Click to enlarge

     
      Upcoming fairs…
     
    Intergeo 2006 (10-12 Oct., Germany)

     

    The Intergeo 2006 is the last exhibition where OmniSTAR will exhibit this year. So don't miss us there!
    Our stand is located in Hall C2, number 2046 (C2.2046).

    Should you wish to meet with us during our on-site demonstration or during our info-meeting than please e-mail us.

     


    Disclaimer:
    We hereby expressly declare that we have no influence whatsoever on the design and content of any web pages reached via links from this Newsletter. OmniSTAR BV hereby expressly disassociates itself from the content of any such linked websites and does not adopt their content.

     


    OmniSTAR BV
    The Netherlands * Phone: +31 70 317 0900 * Fax: +31 70 317 0919

     
    www.omnistar.nl